Trade in any previous generation HP Tuners interface, Standard or Pro, for the newest MPVI3 plus (4) or (6) additional Universal Credits (depending on what generation your trade-in device is).

The “upgrade process” transfers all the vehicle licenses and credits from your old device to your new MPVI3 device plus some extra credits so you can get started tuning right out of the return box! No need to purchase new licenses for all the vehicles you’ve previously licensed with that device.

How It Works

Step 1: To purchase this upgrade, you MUST be logged into your HP Tuners account and your OBDII device MUST be registered under My Devices. Then, select the serial number of the device you want to upgrade in the dropdown above.

Step 2: Once you have successfully purchased the upgrade service, please back up your old device. You can do this by opening VCM Editor and clicking HELP > RESYNC INTERFACE.

Step 3: Then, you’re ready to ship your old device to HP Tuners! Find shipping and service time information below.

NOTE: HP Tuners is offering (4) or (6) additional, free credits per (1) upgrade service depending on the generation of the trade-in device. If sending in multiple old devices to upgrade to a single MPVI3 device, only one set of credits will be added to the new device (ex. [2] MPVI devices sent in for upgrading to [1] MPVI3 will only receive [6] total free credits).

NOTE: This upgrade option does not include the PROLINK+ cable for trade-in Pro devices. However, you can add the PROLINK+ cable to your MPVI3 Interface Upgrade order here. Please note that PROLINK+ is not required to use MPVI3.

Why Upgrade to MPVI3?

• Standard with Pro Feature Set
• Support for Universal Credits
• Access to new and existing vehicle support
• 8GB of onboard storage (2X more than MPVI2+)
• Fastest data logging and reading and writing speeds of any HP Tuners interface
• Bluetooth 5.0 connection
• Built-in high-resolution accelerometer
• M8 motorsports-grade screw-on connector (PROLINK+ sold separately)
• RGB status LEDs
• USB-C connectivity (4MB/s)
• And more!

Compare All Our MPVIx Generations

FEATURES

Standard with Pro Feature Set

X

X
(Available at additional cost.)

X
(Available at additional cost.)

Support for Universal Credits

X

Access to new and existing vehicle support

X

Onboard storage capacity

Limited

4GB

4GB

8GB

Standard with Standalone Data Logging

Limited

X
(Available at additional cost.)

X
(Available at additional cost.)

Bluetooth 5.0 Connection

X

X

Built-In High-Resolution Accelerometer

X

X

X

M8 Motorsports-Grade Screw-on Connection

X

X

RGB Status LEDs

X

USB-C Connectivity

X

TDN Android Support

X

TDN iOS Support

X

X

VEHICLE SUPPORT

GM Global B – E90/E99, T93

X

X

X

GM Global A – E90/E93, E41 (L5P), E99 (ZR1), E46, T93

X

Ford MG1CS036/MD1CP006

X

Powersports – Polaris, Indian Motorcycle, BRP, Honda

X

The post Interface Upgrade – All Gen to MPVI3 appeared first on HP Tuners.

PROLINK and PROLINK+

Only need 1 to 3 inputs with your interface? PROLINK/PROLINK+ is the best solution for you, allowing 2x analog input signals and 1x CAN bus input signal simultaneously.

MPVI2 works with PROLINK.

MPVI2+ and MPVI3 work with PROLINK+.

*MPVI3 is now standard with Pro Feature Set. No additional purchase is necessary to use PROLINK+.

Standalone Data Logging

Standalone Data Logging lets you log directly to your HP Tuners interface’s internal storage without being tethered to a laptop, making it easier than ever to collect data while driving.

Record your vehicle’s data on the go with a press of a button or pre-set start/stop triggers. Then, at your convenience, evaluate and customize start/stop conditions right on your PC or laptop. To learn how to set up triggers and record and access logs, download the Standalone Logging User Guide.

This feature is available as a free update for all MPVI2 and MPVI2+ interfaces with Pro Feature Set. Currently, most controllers supported by VCM Scanner are available for Standalone Data Logging, please contact support for compatibility questions.

Pro Feature Set can also be purchased from your MY ACCOUNT and MY DEVICES page here.

The post Pro Feature Set for MPVI2 and MPVI2+ appeared first on HP Tuners.

If you do not already have User Defined Parameters, the feature can be acquired by logging into your customer page, going to the “My Devices” tab, and purchasing the one-time feature unlock for $169.99 next to your device. After you purchase, go into VCM Editor and re-sync your interface to apply the change.

What are they?

If you have information on parameters (Switches, Scalars, and/or Tables) that we do not have defined, you can add them into the VCM Editor software for editing by using User Define Parameters.

How are they used?

To use this feature, you will first define the parameters using TunerPro, then you will save the TunerPro definition, and finally you will import the TunerPro definition right into the User Defined Parameters feature in VCM Editor.

If you would like parameters added to VCM Editor permanently, please send your request to our support team using the contact tab at the top of the page.

How to define a parameter:

If you have the necessary information you can define and import your own parameters by doing the following:

1. Define the Parameter(s) using TunerPro (To download TunerPro, visit: Download TunerPro)
2. Save your .XDF file with the parameters you wish to import
3. Open your .HPT file in VCM Editor
4. Go to Edit -> User Defined Parameters
5. Open the XDF File and your parameters will be imported into VCM Editor for editing.

Note: If you try to define a parameter outside of the Allowed Addresses range, they will not import, and you will not be allowed to edit them.

Examples

Here is an example XDF File and HPT File to go with it. Do not license or attempt to flash the attached HPT File.

TunerPro XDF File: 05035871AD_HPT_UserDef_Example.xdf
VCM Editor HPT File: 05035871AD – 2014 Jeep Grand Cherokee 6.4L SRT8.hpt


HP Tuners would like to thank Mark Mansur at TunerPro for his support and would encourage everyone to donate to TunerPro here: Donate to TunerPro or to purchase TunerPro RT for a $39 Donation at: Purchase TunerPro RT

Visit our forum to see examples of how to define a Switch, Scalar, and Table, or if your definition requires a base offset. See forum post here.

User Define Parameters can be purchased from your MY ACCOUNT and MY DEVICES page here.

The post User Defined Parameters License appeared first on HP Tuners.