Unleash more power and performance from your Honda powersports machine with a powerful diagnostics and custom tuning solution from HP Tuners. View important diagnostic data, data log your machine on the road, trails, and dyno, and build custom tunes with access to hundreds of editable parameters within air, fuel, and spark.

How it Works

This OBDII Adapter Cable allows you to connect your vehicle to VCM Suite software for tuning and diagnostics via your vehicle’s diagnostics port. Plug the small white/red insert into your machine’s diagnostics port and the OBDII-end into your MPVI2, MPVI2+, or MPVI3 device. Then, run the USB-C cable (supplied with every HP Tuners device) from your device to your laptop with VCM Suite software installed. Once your vehicle is licensed using Universal Credits, you can start tuning!
Visit our supported vehicle list for your machine’s credit-licensing costs.

• Full compatibility with the latest version of VCM Suite BETA software.
• HP Tuners’ OBDII Adapter Cable is required for all Honda Powersports vehicles.
• Compatible with MPVI2, MPVI2+, and MPVI3 interfaces.

The post OBDII Adapter Cables – Honda Powersports appeared first on HP Tuners.

The new E41 ECM Upgrade Kit gives DIY enthusiasts and professional tuners a convenient option to perform the ECM upgrade on their 2017+ Chevy Silverado/GMC Sierra 6.6L Duramax in their own garage/shop. The best part? There’s no need to remove the ECM from the truck. This means there’s no risk of breaking tabs during the removal or reinstallation process. This kit also doesn’t require any reprogramming or relearns.

• No IMMO relearn
• No crank relearn
• No need to perform “Replace ECM” function

From start to finish, you can upgrade your E41 ECM in roughly 20 minutes—all you need is this upgrade kit, your MPVI2+ (with Pro Feature Set) or MPVI3 device (with its supplied USB A to C cable), and a VCM Suite-compliant computer with the latest version of VCM Suite BETA. Once the ECM is upgraded, experience the industry’s most comprehensive diagnostics and tuning package using VCM Suite with full scan, data log, read, edit, and write capabilities. Plus, experience the quickest write times in the industry—approximately 6 minutes!

The post GM E41 ECM Upgrade Kit appeared first on HP Tuners.

Take your Polaris’ off-road performance to the next level with the help of HP Tuners’ complete diagnostic and calibration support! We support a collection of vehicles from the Polaris lineup, including the Ranger, Ace, Sportsman, RZR, and Scrambler models. See our Supported Vehicle List for specific make and model information, along with ECM licensing costs. We also offer tuning support for select Bobcat UTVs for your farm, business, or home use.

• Full compatibility with the latest version of VCM Suite BETA software.
• MG1-equipped models also require the Polaris MG1 ECM Service for tuning.
• HP Tuners’ OBDII Adapter Cable is required for all supported Polaris vehicles.

LEARN MORE ABOUT POLARIS SUPPORT

Indian Motorcycle Tuning

We’re thrilled to add Indian motorcycles to our lineup of supported vehicles. We currently offer custom tuning support for all 2014-2020 models, including the Chief, Pursuit, and Super Chief. Visit our powersports page to explore more Indian Motorcycle support.

LEARN MORE ABOUT INDIAN SUPPORT

The post OBDII Adapter Cable – Polaris and Indian appeared first on HP Tuners.

Designed specifically for MPVI2+ and MPVI3, the PROLINK+ cable allows professional users to input 2x analog signals (from a wideband sensor, map sensor, boost pressure sensor etc.) and 1x CAN bus signal simultaneously.

Reminder: If you have an MPVI2+ interface, you must purchase Pro Feature Set to be able to use a PROLINK+ cable. The purchase of Pro Feature Set for MPVI2+ includes a PROLINK+ cable free of charge (plus shipping).

Read how to add PROLINK+ analog and CAN bus Inputs in the VCM Scanner help center.

PROLINK+ Specifications:

• 2x dedicated 0-5V analog inputs.
• 1x CAN bus input (500kbps).
• 100Hz sampling rate.
• M8 connector to 5 wire harness.
• For MPVI2+ and MPVI3 interfaces.
• MPVI2+ interfaces must purchase Pro Feature Set to be able to use the PROLINK+ cable.

PROLINK+ for MPVI3 Devices

Since the latest generation MPVI3 interface is standard with Pro Feature Set, you only need to purchase the PROLINK+ cable to wire in these additional inputs. No other purchase is required.

PROLINK+ for MPVI2+ Devices

To utilize the PROLINK+ cable with an MPVI2+ interface, the purchase of Pro Feature Set is required. PROLINK+ will be provided FREE of charge (plus shipping) with the purchase of Pro Feature Set for MPVI2+ interfaces. However, if you would like additional PROLINK+ cables for multiple vehicles, you can purchase them on this page.

Pro Feature Set

Pro Feature Set enables the use of PROLINK+ for both MPVI2+ and the latest generation MPVI3. However, remember that MPVI3 is now standard with Pro Feature

Pro Feature Set also unlocks standalone data logging, allowing you to log directly to your interface’s internal storage without being tethered to a laptop. This highly convenient feature makes it easier than ever to collect data while on the road, track, or dyno.

Learn more details about Pro Feature Set.

Pro Feature Set can be purchased on our website or from your MY ACCOUNT > MY DEVICES page.

The post PROLINK+ for MPVI2+ and MPVI3 appeared first on HP Tuners.

• Full compatibility with the latest version of VCM Suite BETA software.
• HP Tuners’ OBDII Adapter Cable is required for all BRP vehicles, including Can-Am and Sea-Doo.
• Compatible with MPVI2 or newer generation interfaces.

LEARN MORE ABOUT BRP SUPPORT

The post OBDII Adapter Cable – BRP appeared first on HP Tuners.

Designed specifically for the MPVI2, the PROLINK cable, together with Pro Feature Set, allows the professional user to input 2x analog signals (from a wideband sensor, MAP sensor, etc) and 1x CAN bus signal, simultaneously.

Reminder: You must purchase Pro Feature Set to be able to use a PROLINK cable.

Read how to add PROLINK analog and CAN bus Inputs in the VCM Scanner help center.

How do I purchase PROLINK?

PROLINK will be provided FREE of charge (plus shipping) with the purchase of Pro Feature Set. However, if you would like additional PROLINK cables for multiple vehicles, you can purchase them here.

Pro Feature Set

Pro Feature Set is a software upgrade that enables standalone data logging and the use of PROLINK for MPVI2 and MPVI2+ interfaces. Learn more.

Specifications:

• 2x dedicated 0-5V analog inputs
• 1x CAN bus input (500kbps)
• 100Hz sampling rate
• HPTnet cable (male) to 5-wire harness
• For MPVI2 ONLY
• Download the Instructions PDF here.

The post PROLINK for MPVI2 appeared first on HP Tuners.

Use this 5′ OBDII cable extension to connect an MPVI2, MPVI2+, or MPVI3 interface to a vehicle’s diagnostics port, allowing easy access to your interface. The extra length also allows tuners to conveniently place their tuning laptop in a comfortable spot.

Specifications:

• OBDII 5′ Cable Extension (male/female).
• Not required for tuning.

The post OBDII 5′ Cable Extension appeared first on HP Tuners.

• OBDII 5′ cable extension – right angle (male/female)

The post OBDII 5′ Cable Extension – Right Angle appeared first on HP Tuners.

• Enables read, write, and special functions for all 2018+ Dodge / Jeep / RAM / Chrysler vehicles.
• Required to log ZF8-HP2.
• Requires internet connection.

The post Dodge 2018+ Smart Access Cable appeared first on HP Tuners.

• USB-A to USB-C, 6′.
• Compatible with MPVI2, MPVI2+, and MPVI3 interfaces.
• Replacement cable.

Note: This cable already comes with every MPVI3 interface. We only recommend purchasing if you need a replacement cable or would like an extra cable on hand.

The post USB A to C 6′ Cable for MPVI2/2+/3 appeared first on HP Tuners.