1. Send in Your ECM: Remove the original MG1 ECM from your vehicle and ship it to us for upgrading.
2. Required Hardware: You’ll need our BRP or Polaris/Indian OBDII Adapter Cable and a compatible MPVI2, MPVI2+, or MPVI3 device (except Sea-Doo models – MPVI3 only).
3. Licensing Credits: After upgrade completion, purchase the required number of  Universal Credits to license and tune your machine.
4. Tune and Log: Once upgraded, connect with VCM Suite to tune, scan, and log through your diagnostics port using the OBDII adapter cable. Download the latest version of VCM Suite BETA.

Note: Universal Credits for licensing are not included in the cost of any upgrade service or purchase. Credits must be purchased separately.

• ECMs must be free of physical damage, with intact connectors and tabs. All units must be fully functional prior to upgrade service.
• For Sea-Doo tuning, this upgrade service is still compatible with a BRP B.U.D.S. flash, so no concerns if your ECM has to go back into the dealer for an update or recall.
• This upgrade service does not alter the ECM’s VIN programming. Sending in a spare MG1 ECM will return it with its original programming and may require dealer reprogramming for functionality.
• Tuning with other tools is not supported.
• These ECM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the ECM is used, calibrated, and its functionality.
• Due to the factory location of the ECM in the vehicle, all ECMs will exhibit signs of weathering and wear, which is completely normal.
• Should you experience any issues with your ECM, please contact support@hptuners.com for assistance on how to proceed.

• VCM Suite Software: Download the latest BETA version of VCM Suite here.
• Credits: Purchase Universal Credits to complete the tuning process.
• OBDII Adapter Cable: Be sure to use the appropriate OBDII Adapter Cable based on your model’s manufacturer.
  • Polaris and Indian models require the Polaris/Indian OBDII Adapter Cable.
  • BRP models require the BRP OBDII Adapter Cable.
• MPVI3 Device Support: This support is compatible with MPVI2 and newer devices (except Sea-Doo models – MPVI3 only).
  • Purchase a new MPVI3.
  • Upgrade your old device to MPVI3.

Shipping address for upgrade service:

HP Tuners, LLC
ATT: Powersports MG1 ECM Service
700 Eastwood Ln
Buffalo Grove, IL 60089

Allow for 1-3 day service time (not including shipping times).

After purchasing this service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of your shipping box where it is visible.

PRINT SHIPPING FORM

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• Your upgraded E66 ECM can only be tuned via the OBDII port with an MPVI3 interface and the latest version of VCM Suite (BETA) (MPV2+ and older generation devices are not compatible with any GM Global B vehicle support).
• While the stock ECM is being serviced at HP Tuners, a spare ECM cannot be temporarily installed and relearned in the vehicle otherwise the stock (now upgraded) ECM that was sent in for service will no longer function in vehicle.
• Once the upgrade is complete, users must license their ECM for (6) Universal Credits (sold separately).
• No other tuning or calibration tools can be used with the ECM (including dealer reflash tools).
• VCM Scanner, dealer diagnostic, and other diagnostic tools will continue to function normally.
• The latest version of VCM Suite can be used to return to stock calibration and/or update to the latest stock calibration.
• There is no need for an IMMO relearn, crank relearn, or the “Replace ECM” function as long as the ECM returns to the same vehicle it came from.
• Please allow 7 to 10 business days for this upgrade service, not including shipping times.

Step 1: Once you’ve confirmed your vehicle’s support, purchase this upgrade service. Make sure you have an MPVI3 interface.

• If you’re new to HP Tuners, purchase a brand new MPVI3.
• If you’re using an MPVI2+ or older generation interface, upgrade to the latest generation MPVI3.

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the ECM from your vehicle and safely package it. Then, package your ECM safely with the shipping form.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your ECM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your ECM for tuning and diagnostics. Then, we’ll ship it back to you.

Step 7: Once you receive your upgraded ECM, install it back into your vehicle. Then, license the upgraded E66 ECM by purchasing [6] Universal Credits (sold separately). Once licensed, start tuning with your MPVI3 interface and the latest version of VCM Suite BETA.

Send your stock GM E66 ECM to the following shipping address:

HP Tuners, LLC
ATT: GM E66 ECM Service (Global B)
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 7 to 10 business days (plus shipping times) per ECM that you send in for servicing (i.e., 2 ECMs = 14-20 business days).

After purchasing this service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM. To avoid any delays should you require other hardware soon, please order that hardware separately.

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
• Due to the factory location of the PCMs in the vehicle, all PCMs will exhibit signs of weathering and wear, which is completely normal.
• When utilizing this service there is a possibility that the vehicle will need to be sent to the dealers to be re synced. Purchaser accepts all liability for this activity.

Should you experience any issues with your PCM, please submit a ticket to our support team for assistance on how to proceed.

• Please note this service is required to tune your GPEC4 controlled vehicles with the 2.0L GME Hurricane I4 Turbo engine.
• In addition to this service, all models require an HP Tuners Dodge Smart Access Cable. We recommend you purchase this cable in a separate order to avoid delays.
• The supported 2022-2023 RAM Rampage and 2023-2024 Dodge Hornet are ONLY compatible with MPVI3 devices.
• Please ensure you are sending in ONLY a PCM. No brackets, rubber isolators, or other pieces should be included. These components may not be returned with your upgraded PCM.
• PCMs with broken “LOCKING” tabs or connectors WILL NOT be accepted for upgrades. No exceptions.
• This is a one-time upgrade that will not affect other operations of the PCM. The factory tools will still work for service.

Step 1: Once you’ve confirmed your vehicle’s support, purchase the upgrade service.

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: If you are sending in your stock PCM, remove the PCM from your vehicle. Then, package the PCM safely with the shipping form inside the box.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your PCM to HP Tuners US headquarters for servicing using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your PCM for tuning. Then, we’ll ship it back to you. The service takes 1-3 business days (not including shipping times).

Step 7: Once you receive your upgraded PCM, install it back into your vehicle. Then, license the upgraded PCM to your MPVI3 device by purchasing (3) Universal Credits. Once licensed, start tuning with your MPVI3 interface and the latest version of VCM Suite BETA.

Shipping address for send-in services:

HP Tuners, LLC.
ATT: RAM GPEC4 PCM Service
[Insert Your Order Number Here]
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 1-3 business days (plus the time to ship the PCM) per PCM that you send in for the upgrade process to finish (i.e., 2 PCMs = 3-6 business days).

If you purchase the upgrade service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM/PCM/TCM. To avoid any delays should you require other hardware soon, please order that hardware separately.

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.

Due to the factory location of the PCMs in the vehicle, all PCMs will exhibit signs of weathering and wear, which is completely normal.
Should you experience any issues with your PCM, please submit a ticket to our support team for assistance on how to proceed.

• Your upgraded E01 ECM can only be tuned via the OBDII port with an MPVI3 interface and the latest version of VCM Suite (BETA) (MPV2+ and older generation devices are not compatible with any GM Global B vehicle support).
• While the stock ECM is being serviced at HP Tuners, a spare ECM cannot be temporarily installed and relearned in the vehicle otherwise the stock (now upgraded) ECM that was sent in for service will no longer function in vehicle.
• Once the upgrade is complete, users must license their ECM for (4) Universal Credits (sold separately).
• No aftermarket tuning or calibration tools can be used with the ECM (not including dealer reflash tools).
• VCM Scanner, dealer diagnostic, and other diagnostic tools will continue to function normally.
• The latest version of VCM Suite can be used to return to stock calibration and/or update to the latest stock calibration.
• Please allow 7 to 10 business days for this upgrade service, not including shipping times.

Step 1: Once you’ve confirmed your vehicle’s support, purchase this upgrade service. Make sure you have an MPVI3 interface.

• If you’re new to HP Tuners, purchase a brand new MPVI3 here.
• If you’re using an MPVI2+ or older generation interface, upgrade to the latest generation MPVI3 here.

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the ECM from your vehicle and safely package it. Then, package your ECM safely with the shipping form.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your ECM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your ECM for tuning and diagnostics. Then, we’ll ship it back to you.

Step 7: Once you receive your upgraded ECM, install it back into your vehicle. Upon reinstallation of the upgraded module into the vehicle, make sure you’re using latest VCM Suite BETA. Always connect to VCM

Scanner first and Read/Clear DTCs. Failure to do so may result in a check engine light and/or warnings to “service” various systems (such as Power Steering).

Step 8: Then, license the upgraded E01 ECM by purchasing [4] Universal Credits (sold separately). Once licensed, start tuning with your MPVI3 interface and the latest version of VCM Suite BETA. We also recommend clearing DTCs using VCM Scanner after each flash.

Send your stock GM E01 ECM to the following shipping address:

HP Tuners, LLC
ATT: GM E01 ECM Service (Global B)
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 7 to 10 business days (plus shipping times) per ECM that you send in for servicing (i.e., 2 ECMs = 14-20 business days).

After purchasing this service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM. To avoid any delays should you require other hardware soon, please order that hardware separately.

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• Upon reinstallation of the upgraded module into the vehicle, users should ensure they are on the latest VCM Suite BETA. Always connect to VCM Scanner first and Read/Clear DTCs. Failure to do so may result in a check engine light and/or warnings to “service” various systems (such as Power Steering).
• We also recommend clearing DTCs using VCM Scanner after each flash.
• These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
• Due to the factory location of the ECM in the vehicle, all ECMs will exhibit signs of weathering and wear, which is completely normal.
• When utilizing this service there is a possibility that the vehicle will need to be sent to the dealers to be re synced. Purchaser accepts all liability for this activity.

Should you experience any issues with your ECM, please submit a ticket to our support team for assistance on how to proceed.

• Please note this service is required to tune your 2015+ Dodge/Chrysler/Jeep/RAM (all FCA models, except the 2015+ Dodge Viper and 2014 to 2019 Jeep/Dodge/Ram vehicles with the EDC17C79 PCM).
• In addition to this service, all 2018+ models require an HP Tuners Dodge 2018+ Smart Access Cable.  We recommend you purchase this cable in a separate order to avoid delays.
• Please ensure you are sending in ONLY a PCM. No brackets, rubber isolators, or other pieces should be included. These components may not be returned with your upgraded PCM.
• PCMs with broken “LOCKING” tabs or connectors WILL NOT be accepted for upgrades. No exceptions.
• This is a one-time upgrade that will not affect other operations of the PCM. The factory tools will still work for service.
• While there is no hardware change, the back cover of the PCM does need to be removed.
• EDC17C79 PCMs installed in 2014 to 2019 Jeep/Dodge/Ram vehicles do not need to be upgraded. The EDC17C79 PCM will update upon the first read of the ECM which will allow read/write abilities.
• As of 12/21/2015, ALL non-original 2015+ Dodge/Chrysler/Jeep/RAM PCMs that are sent in for upgrade must have a stock read performed before it is shipped to us. This read must be uploaded before adding the Upgrade service to the cart.
• Gen 3 EcoDiesel PCMs cannot be read prior to upgrade. Any spare or non-original PCMs will need to be programmed to the vehicle before or after the upgrade by HP Tuners—this is the responsibility of the customer.
• If you are sending us a spare PCM, please make sure to send a read from the stock PCM. The stock read must be done as a GPEC2A, 2015+ Dodge or a GPEC2, 2015+ Dodge (depending on which PCM the vehicle is equipped with. Please see the Dodge PCM Identification Thread if you are unsure which PCM you have). If you do not have access to perform the read, please download the latest update from your customer page and try again.
• Once ordered, you can send either an original PCM or a spare. The spare has to be a compatible PCM.

These steps only apply to the send-in upgrade service, NOT the new PCM purchase.

Step 1: Once you’ve confirmed your vehicle’s support, purchase the upgrade service.

Please make sure to include the make and model of your vehicle, a copy of the HPT or RTD file, and the VIN (please double-check the VIN for accuracy to avoid delays).

If you are sending us a spare PCM, please make sure to send a read from the stock PCM.

If you have a 2018+ Dodge vehicle, you also need to purchase the 2018+ Dodge Smart Access Cable. We suggest you purchase this on a separate order.

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: If you are sending in your stock PCM, remove the PCM from your vehicle. Then, package the PCM safely with the shipping form inside the box.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your PCM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your PCM for tuning. Then, we’ll ship it back to you. The service takes 1-3 business days (not including shipping times).

Step 7: Once you receive your upgraded PCM, install it back into your vehicle. Then, license the upgraded PCM by purchasing the required number of MPVI/Universal Credits (sold separately, see vehicle list for credits costs). Once licensed, start tuning with your MPVIx interface and the latest version of VCM Suite BETA.

---

This only applies to new Dodge PCM purchases, NOT the upgrade service.

If you plan to purchase a new, already upgraded Dodge PCM, you must include the following information when adding to your cart: the make and model of your vehicle, the stock calibration file read of your vehicle’s PCM, and the VIN (please double-check the VIN for accuracy to avoid delays).

Please allow 1 to 3 business days from once we receive your stock calibration file to process your order and apply your file to the new PCM.

Shipping address for send-in services:

HP Tuners, LLC.
ATT: Dodge Upgrade Service
[Insert Your Order Number Here]
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 1-3 business days (plus the time to ship the PCM) per PCM that you send in for the upgrade process to finish (i.e., 2 PCMs = 3-6 business days).

If you purchase the upgrade service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM/PCM/TCM. To avoid any delays should you require other hardware soon, please order that hardware separately.

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.

Due to the factory location of the PCMs in the vehicle, all PCMs will exhibit signs of weathering and wear, which is completely normal.

Should you experience any issues with your PCM, please submit a ticket to our support team for assistance on how to proceed.

• The TCM you send in should already be programmed prior to the upgrade service. If you choose to send in a spare TCM, you are responsible for providing us with accurate vehicle information at the time you place your order and for later having the TCM programmed via a J2534 tool or OEM Dealer Diagnostic tool to your vehicle.
• After the TCM arrives at HP Tuners, an HP Tuners engineer will upgrade the TCM and enable your HP Tuners software so that the TCM can then be licensed, edited, and flashed with HP Tuners software! This is a one-time upgrade that will not affect other operations of the TCM. The factory tools will still work for service and HP Tuners will then work for tuning!
• Once you receive the TCM back from upgrade, re-install the TCM back into the vehicle, and then you may tune the TCM with HP Tuners by licensing the TCM for (4) credits.

These steps only apply to the send-in upgrade services, NOT the new TCM purchase.

Step 1: Once you’ve confirmed your vehicle’s support, select the upgrade service that fits your needs best. If you select the Upgrade & Program option, please add your VIN to the box when adding to your cart.

• If you’re new to HP Tuners, purchase a brand new MPVI3 here.
• If you’re using an MPVI2+ or older generation interface, upgrade to the latest generation MPVI3 here.

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the TCM from your vehicle and safely package it. Then, package your TCM safely with the shipping form.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your TCM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your TCM for tuning and diagnostics. Then, we’ll ship it back to you. The service takes 1-3 business days (not including shipping times).

Step 7: Once you receive your upgraded TCM, install it back into your vehicle. If you selected the “Upgrade & Program” option, please follow these instructions upon reinstallation. Then, license the upgraded T87A TCM by purchasing [4] Universal Credits (sold separately). Once licensed, start tuning with your MPVI3 interface and the latest version of VCM Suite BETA.

The address to ship your TCM for upgrade is:

HP Tuners, LLC
ATT: GM T87A TCM Service
[Insert your order number here]
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 1-3 business days (plus the time to ship the TCM) per TCM that you send in for the upgrade process to finish. (i.e., 2 TCMs = 2-6 business days.)

If you purchased an upgrade service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM/PCM/TCM. To avoid any delays should you require other hardware soon, please order that hardware separately.

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• • These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
  • Due to the factory location of the TCM in the vehicle, all TCMs will exhibit signs of weathering and wear, which is completely normal.

Should you experience any issues with your TCM, please submit a ticket to our support team for assistance on how to proceed.

• Your upgraded E90 ECM can only be tuned via the OBDII port with an MPVI3 interface and the latest version of VCM Suite (BETA) (MPV2+ and older generation devices are not compatible with any GM Global B vehicle support).
• While the stock ECM is being serviced at HP Tuners, a spare ECM cannot be temporarily installed and relearned in the vehicle otherwise the stock (now upgraded) ECM that was sent in for service will no longer function in vehicle.
• Once the upgrade is complete, users must license their ECM for (8) Universal Credits (per ECM) (credits sold separately).
• No other tuning or calibration tools can be used with the ECM.
• VCM Scanner, dealer diagnostic, and other diagnostic tools will continue to function normally.
• The latest version of VCM Suite can be used to return to stock calibration and/or update to the latest stock calibration.
• There is no need for an IMMO relearn, crank relearn, or the “Replace ECM” function as long as the ECM returns to the same vehicle it came from.
• Please allow 7 to 10 business days for this upgrade service, not including shipping times.

Step 1: Once you’ve confirmed your vehicle’s support, purchase this upgrade service. Make sure you have an MPVI3 interface.

• If you’re new to HP Tuners, purchase a brand new MPVI3 here.
• If you’re using an MPVI2+ or older generation interface, upgrade to the latest generation MPVI3 here.

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the ECM from your vehicle and safely package it. Then, package your ECM safely with the shipping form.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your ECM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your ECM for tuning and diagnostics. Then, we’ll ship it back to you.

Step 7: Once you receive your upgraded ECM, install it back into your vehicle. Then, license the upgraded E90 ECM by purchasing [8] Universal Credits (sold separately). Once licensed, start tuning with your MPVI3 interface and the latest version of VCM Suite BETA.

Send your stock GM E90 ECM to the following shipping address:

HP Tuners, LLC
ATT: GM E9o ECM Service (Global B)
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 7 to 10 business days (plus shipping times) per ECM that you send in for servicing (i.e., 2 ECMs = 14-20 business days).

After purchasing this service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

  NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM. To avoid any delays should you require other hardware soon, please order that hardware separately.

  NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
• Due to the factory location of the ECM in the vehicle, all ECMs will exhibit signs of weathering and wear, which is completely normal.
• When utilizing this service there is a possibility that the vehicle will need to be sent to the dealers to be re synced. Purchaser accepts all liability for this activity.

Should you experience any issues with your ECM, please submit a ticket to our support team for assistance on how to proceed.

• This service is required to tune 2021-2022 F-150 trucks with the 3.5L EcoBoost/2.7L EcoBoost/3.5L PowerBoost Hybrid V6/2021-2023 5.0L gas engine and MG1CS036 PCM using VCM Editor.
• This is a send-in upgrade service that requires the original PCM to be removed from the vehicle and sent to HP Tuners for servicing.
• Expect 1-3 business days for servicing (not including shipping times).
• PCMs with broken tabs or connectors WILL NOT be accepted for upgrades. No exceptions. Please be careful when removing your PCM.
• This service only upgrades your original PCM for tuning, it does not reprogram your PCM for a different VIN. If you intend to send HP Tuners a spare PCM, it will be returned to you with the same programming as it was received and may not operate in your Ford vehicle without additional programming by a Ford dealer.
• Your MG1 core must be fully functional with no physical or internal damage.
• No other tuning/calibration tools can be used with the upgraded PCM. However, dealers can reflash the PCM once upgraded—this will not relock the PCM.
• VCM Scanner, Dealer Diagnostic, and other diagnostic tools will continue to function normally.

Step 1: Once you’ve confirmed your vehicle’s support (2021-2022 Ford F-150 3.5L EcoBoost/2.7L EcoBoost/3.5L PowerBoost Hybrid V6/2021-2023 5.0L with MG1CS036 PCM), purchase this service.
Step 2: After placing your order, you will receive an email with a shipping form and shipping information. You can also find this form and address here. Fill out this form with the necessary information.
Step 3: Carefully remove the PCM from your vehicle and securely package it to ship to HP Tuners. Place your completed shipping form in the box. Feel free to use any shipping carrier you prefer.
Step 4: Write your order number on the outside of the shipping box.
Step 5: Ship your PCM to HP Tuners. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs to and from HP Tuners are the responsibility of the customer. The shipping charge at checkout only covers return shipping.
Step 6: HP Tuners will upgrade your PCM for tuning. Then, we’ll ship it back to you (return shipping costs are paid by the customer at checkout). This service requires 1-3 business days to complete (excluding shipping times).
Step 7: Once you receive your upgraded PCM, install it back into your vehicle and start tuning! There are no relearns or reprogramming required as long as the PCM returns to the same vehicle it came from.

Shipping Address for PCM Upgrade:

HP Tuners, LLC
ATT: Ford MG1 PCM Service
[YOUR ORDER NUMBER]
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow for 1-3 business days for servicing (not including shipping times).

After purchasing this service, please fill out the shipping form and place it in your shipping box. Please also write your order number on the outside of your shipping box where it is visible.

PRINT SHIPPING FORM

  NOTE: Customers are responsible for shipping costs when sending HP Tuners your PCM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification. Feel free to use any shipping carrier you prefer to ship your controller to HP Tuners.

  NOTE: Any hardware ordered with this service will be shipping along with your modified PCM. To avoid delays, please order the hardware separately.

• These PCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the PCM is used, calibrated, and its functionality.
• Due to the factory location of the PCM in the vehicle, all PCMs will exhibit signs of weathering and wear, which is completely normal.

Should you experience any issues with your PCM, please submit a ticket to our support team for assistance on how to proceed.

• HP Tuners supports 2020-2022 Chevrolet Silverado 1500/GMC Sierra 1500 3.0L Duramax (LM2) trucks that are non-Global B. This includes “facelift” trucks as they are Global-B and contain a different controller.
• ECMs with broken tabs or connectors WILL NOT be accepted for Upgrades.
• This service only upgrades your original ECM for tuning, it does not reprogram your ECM for a different VIN. If you intend to send HP Tuners a spare E46 ECM, it will be returned to you with the same programming as it was received and may not operate in your GM vehicle without additional programming by a GM dealer.
• Your E46 ECM core must be fully functional with no physical or internal damage.
• No other tuning or calibration tools can be used with the E46 ECM (not including dealer reflash tools).
• VCM Scanner, Dealer Diagnostic, and other diagnostic tools will continue to function normally.
• The latest version of VCM Suite can be used to return to the stock calibration and/or update to the latest stock calibration.
• The E46 ECM upgrade service takes about 1 to 3 business days to complete (not including shipping times).
• HP Tuners’ E46 ECM support does not cover the Chevrolet Suburban LM2 at this time.

Step 1: Once you’ve confirmed your vehicle’s support (2020-2022 Chevrolet Silverado 1500/GMC Sierra 1500 3.0L Duramax (LM2) with E46 ECM), purchase this service.

Step 2: After placing your order, see the “Shipping” tab for a shipping form and address. Fill out this form and place it in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the ECM from your vehicle and safely package it. Place your completed shipping form in the box.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your ECM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your ECM for tuning and diagnostics. Then, we’ll ship it back to you.

Step 7: Once you receive your upgraded ECM, install it back into your vehicle. License the E46 ECM for (6) Universal Credits (sold separately) and start tuning with your MPVI2 or newer generation device and the latest version of VCM Suite BETA

Shipping address for ECM upgrade:

HP Tuners, LLC
ATT: E46 ECM Service
[YOUR ORDER NUMBER]
700 Eastwood Ln
Buffalo Grove, IL 60089

Allow for 1-3 business days of service time (not including shipping times).

After purchasing this service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of your shipping box where it is visible.

PRINT SHIPPING FORM

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• Please note this service is required to tune your 2020-2021 Ford F-Series Super Duty vehicles with the 6.7L Power Stroke Diesel engine.
• Please ensure you are sending in ONLY a ECM. No brackets, rubber isolators, or other pieces should be included. These components may not be returned with your upgraded ECM.
• This service only upgrades your original ECM for tuning, it does not reprogram your ECM for a different VIN. If you intend to send HP Tuners a spare MD1CP006 ECM, it will be returned to you with the same programming as it was received and may not operate in your Ford vehicle without additional programming by a Ford dealer.
• ECMs with broken “LOCKING” tabs or connectors WILL NOT be accepted for upgrades. No exceptions.
• This is a one-time upgrade that will not affect other operations of the ECM.
• No other tuning or calibration tools can be used with the ECM post-upgrade (including dealer reflash tools).

These steps only apply to the send-in upgrade service, NOT the new ECM purchase.

Step 1: Once you’ve confirmed your vehicle’s support (2020-2021 F-series Super Duty diesel truck with the MD1CP006 ECM), purchase the upgrade service.

Please make sure to include the make and model of your vehicle, a copy of the HPT or RTD file, and the VIN (please double-check the VIN for accuracy to avoid delays).

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the ECM from your vehicle. Package the ECM safely with the shipping form inside the box.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your ECM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your ECM for tuning. Then, we’ll ship it back to you. The service takes 3-5 business days (not including shipping times).

Step 7: Once you receive your upgraded ECM, install it back into your vehicle. Then, license the upgraded ECM by purchasing the required number of MPVI/Universal Credits (sold separately, see vehicle list for credits costs). Once licensed, start tuning with your MPVI2 or newer interface and the latest version of VCM Suite BETA.

Shipping address for send-in services:

HP Tuners, LLC ATT: Ford MG1 PCM Service
[YOUR ORDER NUMBER] 700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 3-5 business days (plus the time to ship the ECM) per ECM that you send in for the upgrade process to finish (i.e., 2 ECMs = 6-10 business days).

If you purchase the upgrade service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM/PCM/TCM. To avoid any delays should you require other hardware soon, please order that hardware separately.

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
• Due to the factory location of the ECMs in the vehicle, all ECMs will exhibit signs of weathering and wear, which is completely normal.
• Should you experience any issues with your ECM, please submit a ticket to our support team for assistance on how to proceed.