• Please note this service is required to tune your 2020-2021 Ford F-Series Super Duty vehicles with the 6.7L Power Stroke Diesel engine.
• Please ensure you are sending in ONLY a ECM. No brackets, rubber isolators, or other pieces should be included. These components may not be returned with your upgraded ECM.
• This service only upgrades your original ECM for tuning, it does not reprogram your ECM for a different VIN. If you intend to send HP Tuners a spare MD1CP006 ECM, it will be returned to you with the same programming as it was received and may not operate in your Ford vehicle without additional programming by a Ford dealer.
• ECMs with broken “LOCKING” tabs or connectors WILL NOT be accepted for upgrades. No exceptions.
• This is a one-time upgrade that will not affect other operations of the ECM.
• No other tuning or calibration tools can be used with the ECM post-upgrade (including dealer reflash tools).

These steps only apply to the send-in upgrade service, NOT the new ECM purchase.

Step 1: Once you’ve confirmed your vehicle’s support (2020-2021 F-series Super Duty diesel truck with the MD1CP006 ECM), purchase the upgrade service.

Please make sure to include the make and model of your vehicle, a copy of the HPT or RTD file, and the VIN (please double-check the VIN for accuracy to avoid delays).

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the ECM from your vehicle. Package the ECM safely with the shipping form inside the box.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your ECM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your ECM for tuning. Then, we’ll ship it back to you. The service takes 3-5 business days (not including shipping times).

Step 7: Once you receive your upgraded ECM, install it back into your vehicle. Then, license the upgraded ECM by purchasing the required number of MPVI/Universal Credits (sold separately, see vehicle list for credits costs). Once licensed, start tuning with your MPVI2 or newer interface and the latest version of VCM Suite BETA.

Shipping address for send-in services:

HP Tuners, LLC ATT: Ford MG1 PCM Service
[YOUR ORDER NUMBER] 700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 3-5 business days (plus the time to ship the ECM) per ECM that you send in for the upgrade process to finish (i.e., 2 ECMs = 6-10 business days).

If you purchase the upgrade service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM/PCM/TCM. To avoid any delays should you require other hardware soon, please order that hardware separately.

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
• Due to the factory location of the ECMs in the vehicle, all ECMs will exhibit signs of weathering and wear, which is completely normal.
• Should you experience any issues with your ECM, please submit a ticket to our support team for assistance on how to proceed.

• ECMs with broken tabs will NOT be accepted for Upgrades.
• Your Purchased or Upgraded E41 ECM can only be tuned via the OBDII port with an MPVI2/2+/3 (updated with the latest firmware), the latest version of VCM Suite BETA, and an internet connection.
• No other tuning or calibration tools can be used with the ECM (including dealer reflash tools).
• The latest version of VCM Suite can be used to return to stock calibration and/or update to the latest stock calibration.
• If you select the PURCHASE option, you must follow these installation steps once receiving your new ECM.
• VCM Scanner, Dealer Diagnostic, and other diagnostic tools will continue to function normally.
• VCM Suite (version 4.13+) can be used to return to the stock calibration and/or update to the latest stock calibration.
• If purchasing a new ECM, the Vehicle Anti-Theft System relearn (by a dealer tool) is required once the new ECM is installed.
• The GM E41 ECM Upgrade Service take 1-3 business days to complete (not including shipping times) per ECM.

These steps only apply to the send-in upgrade service, NOT the purchase.

Step 1: Once you’ve confirmed your vehicle’s support (2017+ Chevrolet Silverado and GMC Sierra 2500/3500 6.6L Duramax with E41 ECM), purchase this service.

Step 2: After placing your order, see the “Shipping” tab for a shipping form and address. Fill out this form and place it in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove your E41 ECM from your vehicle and safely package it. Place your completed shipping form in the box.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your ECM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your ECM for tuning and diagnostics. Then, we’ll ship it back to you.

Step 7: Once you receive your upgraded ECM, install it back into your vehicle. License the E41 ECM for (8) Universal Credits (sold separately) and start tuning with your MPVI2 or newer generation device and the latest version of VCM Suite BETA.

Shipping address for send-in service:

HP Tuners, LLC
ATT: L5P ECM Service
700 Eastwood Ln
Buffalo Grove, IL 60089

After purchasing this service, please fill out the shipping form below and place it inside your shipping box.

PRINT SHIPPING FORM

Please allow 1-3 business days (not including shipping times) per ECM that you send in for the upgrade process to be completed.

Any additional hardware ordered with this product will be shipped along with your ECM. To avoid any delays on other products, please create a separate order for those items.

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
• Due to the factory location of the PCMs in the vehicle, all PCMs will exhibit signs of weathering and wear, which is completely normal.

Should you experience any issues with your PCM, please submit a ticket to our support team for assistance on how to proceed.