• Your upgraded E66 ECM can only be tuned via the OBDII port with an MPVI3 interface and the latest version of VCM Suite (BETA) (MPV2+ and older generation devices are not compatible with any GM Global B vehicle support).
• While the stock ECM is being serviced at HP Tuners, a spare ECM cannot be temporarily installed and relearned in the vehicle otherwise the stock (now upgraded) ECM that was sent in for service will no longer function in vehicle.
• Once the upgrade is complete, users must license their ECM for (6) Universal Credits (sold separately).
• No other tuning or calibration tools can be used with the ECM (including dealer reflash tools).
• VCM Scanner, dealer diagnostic, and other diagnostic tools will continue to function normally.
• The latest version of VCM Suite can be used to return to stock calibration and/or update to the latest stock calibration.
• There is no need for an IMMO relearn, crank relearn, or the “Replace ECM” function as long as the ECM returns to the same vehicle it came from.
• Please allow 7 to 10 business days for this upgrade service, not including shipping times.

Step 1: Once you’ve confirmed your vehicle’s support, purchase this upgrade service. Make sure you have an MPVI3 interface.

• If you’re new to HP Tuners, purchase a brand new MPVI3.
• If you’re using an MPVI2+ or older generation interface, upgrade to the latest generation MPVI3.

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the ECM from your vehicle and safely package it. Then, package your ECM safely with the shipping form.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your ECM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your ECM for tuning and diagnostics. Then, we’ll ship it back to you.

Step 7: Once you receive your upgraded ECM, install it back into your vehicle. Then, license the upgraded E66 ECM by purchasing [6] Universal Credits (sold separately). Once licensed, start tuning with your MPVI3 interface and the latest version of VCM Suite BETA.

Send your stock GM E66 ECM to the following shipping address:

HP Tuners, LLC
ATT: GM E66 ECM Service (Global B)
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 7 to 10 business days (plus shipping times) per ECM that you send in for servicing (i.e., 2 ECMs = 14-20 business days).

After purchasing this service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM. To avoid any delays should you require other hardware soon, please order that hardware separately.

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
• Due to the factory location of the PCMs in the vehicle, all PCMs will exhibit signs of weathering and wear, which is completely normal.
• When utilizing this service there is a possibility that the vehicle will need to be sent to the dealers to be re synced. Purchaser accepts all liability for this activity.

Should you experience any issues with your PCM, please submit a ticket to our support team for assistance on how to proceed.

• Your upgraded E01 ECM can only be tuned via the OBDII port with an MPVI3 interface and the latest version of VCM Suite (BETA) (MPV2+ and older generation devices are not compatible with any GM Global B vehicle support).
• While the stock ECM is being serviced at HP Tuners, a spare ECM cannot be temporarily installed and relearned in the vehicle otherwise the stock (now upgraded) ECM that was sent in for service will no longer function in vehicle.
• Once the upgrade is complete, users must license their ECM for (4) Universal Credits (sold separately).
• No aftermarket tuning or calibration tools can be used with the ECM (not including dealer reflash tools).
• VCM Scanner, dealer diagnostic, and other diagnostic tools will continue to function normally.
• The latest version of VCM Suite can be used to return to stock calibration and/or update to the latest stock calibration.
• Please allow 7 to 10 business days for this upgrade service, not including shipping times.

Step 1: Once you’ve confirmed your vehicle’s support, purchase this upgrade service. Make sure you have an MPVI3 interface.

• If you’re new to HP Tuners, purchase a brand new MPVI3 here.
• If you’re using an MPVI2+ or older generation interface, upgrade to the latest generation MPVI3 here.

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the ECM from your vehicle and safely package it. Then, package your ECM safely with the shipping form.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your ECM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your ECM for tuning and diagnostics. Then, we’ll ship it back to you.

Step 7: Once you receive your upgraded ECM, install it back into your vehicle. Upon reinstallation of the upgraded module into the vehicle, make sure you’re using latest VCM Suite BETA. Always connect to VCM

Scanner first and Read/Clear DTCs. Failure to do so may result in a check engine light and/or warnings to “service” various systems (such as Power Steering).

Step 8: Then, license the upgraded E01 ECM by purchasing [4] Universal Credits (sold separately). Once licensed, start tuning with your MPVI3 interface and the latest version of VCM Suite BETA. We also recommend clearing DTCs using VCM Scanner after each flash.

Send your stock GM E01 ECM to the following shipping address:

HP Tuners, LLC
ATT: GM E01 ECM Service (Global B)
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 7 to 10 business days (plus shipping times) per ECM that you send in for servicing (i.e., 2 ECMs = 14-20 business days).

After purchasing this service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM. To avoid any delays should you require other hardware soon, please order that hardware separately.

NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• Upon reinstallation of the upgraded module into the vehicle, users should ensure they are on the latest VCM Suite BETA. Always connect to VCM Scanner first and Read/Clear DTCs. Failure to do so may result in a check engine light and/or warnings to “service” various systems (such as Power Steering).
• We also recommend clearing DTCs using VCM Scanner after each flash.
• These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
• Due to the factory location of the ECM in the vehicle, all ECMs will exhibit signs of weathering and wear, which is completely normal.
• When utilizing this service there is a possibility that the vehicle will need to be sent to the dealers to be re synced. Purchaser accepts all liability for this activity.

Should you experience any issues with your ECM, please submit a ticket to our support team for assistance on how to proceed.

• Your upgraded E90 ECM can only be tuned via the OBDII port with an MPVI3 interface and the latest version of VCM Suite (BETA) (MPV2+ and older generation devices are not compatible with any GM Global B vehicle support).
• While the stock ECM is being serviced at HP Tuners, a spare ECM cannot be temporarily installed and relearned in the vehicle otherwise the stock (now upgraded) ECM that was sent in for service will no longer function in vehicle.
• Once the upgrade is complete, users must license their ECM for (8) Universal Credits (per ECM) (credits sold separately).
• No other tuning or calibration tools can be used with the ECM.
• VCM Scanner, dealer diagnostic, and other diagnostic tools will continue to function normally.
• The latest version of VCM Suite can be used to return to stock calibration and/or update to the latest stock calibration.
• There is no need for an IMMO relearn, crank relearn, or the “Replace ECM” function as long as the ECM returns to the same vehicle it came from.
• Please allow 7 to 10 business days for this upgrade service, not including shipping times.

Step 1: Once you’ve confirmed your vehicle’s support, purchase this upgrade service. Make sure you have an MPVI3 interface.

• If you’re new to HP Tuners, purchase a brand new MPVI3 here.
• If you’re using an MPVI2+ or older generation interface, upgrade to the latest generation MPVI3 here.

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the ECM from your vehicle and safely package it. Then, package your ECM safely with the shipping form.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your ECM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your ECM for tuning and diagnostics. Then, we’ll ship it back to you.

Step 7: Once you receive your upgraded ECM, install it back into your vehicle. Then, license the upgraded E90 ECM by purchasing [8] Universal Credits (sold separately). Once licensed, start tuning with your MPVI3 interface and the latest version of VCM Suite BETA.

Send your stock GM E90 ECM to the following shipping address:

HP Tuners, LLC
ATT: GM E9o ECM Service (Global B)
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 7 to 10 business days (plus shipping times) per ECM that you send in for servicing (i.e., 2 ECMs = 14-20 business days).

After purchasing this service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

  NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM. To avoid any delays should you require other hardware soon, please order that hardware separately.

  NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
• Due to the factory location of the ECM in the vehicle, all ECMs will exhibit signs of weathering and wear, which is completely normal.
• When utilizing this service there is a possibility that the vehicle will need to be sent to the dealers to be re synced. Purchaser accepts all liability for this activity.

Should you experience any issues with your ECM, please submit a ticket to our support team for assistance on how to proceed.

• Our T93 TCM service supports TCMs with Serv#: 24043414, 24043412, and 24294753. We do not currently support TCMs with Serv#: 24049788 and #24056863 currently. Please confirm support before purchasing this upgrade service.
• While the stock TCM is being serviced at HP Tuners, a spare TCM cannot be temporarily installed and relearned in the vehicle otherwise the stock (now upgraded) TCM that was sent in for service will no longer function in vehicle.
• Your upgraded T93 TCM can only be tuned via the OBDII port with an MPVI3 interface and the latest version of VCM Suite (BETA) (MPVI2+ and older generation devices are not compatible with any GM Global B vehicle support).
• Once the upgrade is complete, users must license their TCM for (4) Universal Credits (sold separately).
• This is a one-time upgrade that will not affect other operations of the TCM. The factory tools will still work for service and HP Tuners will then work for tuning.
• Upon reinstallation of your upgraded control module, we recommend that you first connect to the lastest version of VCM Scanner and read/clear DTCs.
• No other tuning or calibration tools can be used with the TCM.
• VCM Scanner, dealer diagnostic, and other diagnostic tools will continue to function normally.
• The latest version of VCM Suite can be used to return to stock calibration and/or update to the latest stock calibration.
• Please also allow 7 to 10 business days for this upgrade service, not including shipping times.

Step 1: Once you’ve confirmed your vehicle’s support, purchase this upgrade service. Make sure you have an MPVI3 interface.

• If you’re new to HP Tuners, purchase a brand new MPVI3 here.
• If you’re using an MPVI2+ or older generation interface, upgrade to the latest generation MPVI3 here.

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the TCM from your vehicle and safely package it. Then, package your TCM safely with the shipping form.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your TCM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade and/or program your TCM for tuning and diagnostics. Then, we’ll ship it back to you.

Step 7: Once you receive your upgraded TCM, install it back into your vehicle. Then, license the upgraded T93 TCM by purchasing [4] Universal Credits (sold separately). Once licensed, we recommend that you first connect to the latest version of VCM Scanner and read/clear DTCs. Then, start tuning with your MPVI3 interface and the latest version of VCM Suite BETA.

Send your stock GM T93 TCM to the following shipping address:

HP Tuners, LLC
ATT: GM T93 TCM Service (Global B)
[YOUR ORDER NUMBER]
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 7 to 10 business days per TCM that you send in for the upgrade process, not including shipping times (i.e., 2 TCMs = 14-20 business days).

After purchasing this service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

  NOTE: Any hardware ordered with this product will be shipped along with your upgraded TCM. To avoid any delays should you require other hardware soon, please order that hardware separately.

  NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
• Due to the factory location of the TCM in the vehicle, all TCMs will exhibit signs of weathering and wear, which is completely normal.
• When utilizing this service there is a possibility that the vehicle will need to be sent to the dealers to be re synced. Purchaser accepts all liability for this activity.

Should you experience any issues with your TCM, please submit a ticket to our support team for assistance on how to proceed.

• Your upgraded E99 ECM can only be tuned via the OBDII port with an MPVI3 interface and the latest version of VCM Suite (BETA) (MPVI2+ and older generation devices are not compatible with any GM Global B vehicle support).
• While the stock ECM is being serviced at HP Tuners, a spare ECM cannot be temporarily installed and relearned in the vehicle otherwise the stock (now upgraded) ECM that was sent in for service will no longer function in vehicle.
• Once the upgrade is complete, users must license their ECM for (8) Universal Credits (sold separately).
• Upon reinstallation of your upgraded control module, we recommend that you first connect to the lastest version of VCM Scanner and read/clear DTCs.
• No other tuning or calibration tools can be used with the ECM.
• VCM Scanner, dealer diagnostic, and other diagnostic tools will continue to function normally.
• The latest version of VCM Suite can be used to return to stock calibration and/or update to the latest stock calibration.
• There is no need for an IMMO relearn, crank relearn, or the “Replace ECM” function as long as the ECM returns to the same vehicle it came from.
• Please allow 7 to 10 business days for this upgrade service, not including shipping times.

Step 1: Once you’ve confirmed your vehicle’s support, purchase this upgrade service. Make sure you have an MPVI3 interface.

• If you’re new to HP Tuners, purchase a brand new MPVI3 here.
• If you’re using an MPVI2+ or older generation interface, upgrade to the latest generation MPVI3 here.

Step 2: After placing your order with the necessary information, see the “Shipping” tab for a shipping form and address. Fill out and print this form to place in your shipping box. You will also receive an email immediately after placing your order with this shipping form and address.

Step 3: Remove the ECM from your vehicle and safely package it. Then, package your ECM safely with the shipping form. Reminder: While the stock ECM is being serviced at HP Tuners, a spare ECM cannot be temporarily installed and relearned in the vehicle otherwise the stock (now upgraded) ECM that was sent in for service will no longer function in vehicle.

Step 4: Write your order number on the outside of the shipping box.

Step 5: Ship your ECM to HP Tuners using any carrier you prefer. The shipping address can be found on this page and in the email discussed in Step 2. Shipping costs are the responsibility of the customer.

Step 6: HP Tuners will upgrade your ECM for tuning and diagnostics. Then, we’ll ship it back to you.

Step 7: Once you receive your upgraded ECM, install it back into your vehicle. Then, license the upgraded E99 ECM by purchasing [8] Universal Credits (sold separately). Once licensed, we recommend that you first connect to the latest version of VCM Scanner and read/clear DTCs. Then, start tuning with your MPVI3 interface and the latest version of VCM Suite BETA.

Send your stock GM E99 ECM to the following shipping address:

HP Tuners, LLC
ATT: GM E99 ECM Service (Global B)
700 Eastwood Ln
Buffalo Grove, IL 60089

Please allow 7 to 10 business days (plus shipping times) per ECM that you send in for servicing (i.e., 2 ECMs = 14-20 business days).

After purchasing this service, please fill out the shipping form below and place it inside your shipping box. Please also write your order number on the outside of the shipping box where it is visible.

PRINT SHIPPING FORM

  NOTE: Any hardware ordered with this product will be shipped along with your upgraded ECM. To avoid any delays should you require other hardware soon, please order that hardware separately.

  NOTE: Customers are responsible for shipping costs when sending HP Tuners your ECM/PCM/TCM. The shipping charge at checkout only covers returning your control module after modification.

• These ECM/PCM/TCM services are completed at the owner’s risk. HP Tuners will not be responsible for the vehicle, its powertrain, or electronics, nor how the control module is used, calibrated, and its functionality.
• Due to the factory location of the ECM in the vehicle, all ECMs will exhibit signs of weathering and wear, which is completely normal.
• When utilizing this service there is a possibility that the vehicle will need to be sent to the dealers to be re synced. Purchaser accepts all liability for this activity.

Should you experience any issues with your ECM, please submit a ticket to our support team for assistance on how to proceed.